The following Product Service Codes (PSCs) are commonly associated with NAICS 333611, Turbine and Turbine Generator Set Units Manufacturing

PSC 2835 Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components

Top Result Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Description
Gas Turbines and Jet Engines, Non-Aircraft; and Components

Includes
Airflow Deflectors; Turbine Cases; Turbine Housings; Compressor and Turbine Rotors; Compressor and Turbine Rotor Blades; Combustion Chamber; Accessory Gear Box; Turbine Disks and Hubs; Turbine Vanes.

Excludes
Engine Fuel System Components (FSC 2910); Engine electrical System Components (FSC 2920); Engine Cooling System Components (FSC 2930); Engine Air/Oil Cleaners/Filters/Strainers (FSC 2940); Engine Accessories (Air Duct Heaters, Engine Mounted Control Assemblies) (FSC 2990).

Notes
Engines and Components classified in this FSC are primarily for use on non-aircraft equipment but can also be used on aircraft ground support equipment.

Possible NAICS Codes
333611 – Turbine and Turbine Generator Set Units Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
334519 – Other Measuring and Controlling Device Manufacturing
332510 – Hardware Manufacturing
333613 – Mechanical Power Transmission Equipment Manufacturing
336411 – Aircraft Manufacturing
332991 – Ball and Roller Bearing Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
339950 – Sign Manufacturing
336412 – Aircraft Engine and Engine Parts Manufacturing

PSC 2840 Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Compressor and Turbine Rotors; Blades; Combustion Chamber; Accessory Gear Box; Afterburner; Exhaust Cone; Reservoirs, Hydraulic; Tank, Oil.

Excludes
Oil, Air, Anti-icing, and Hydraulic Regulators, Valves, and Pumps specially designed for Gas Turbines and Jet Engines (FSC 2995); Control Assemblies, Push-Pull (FSC 2995); Engine Mounted Control Assemblies (FSC 2995); Fuel System Components (FSC 2915); Engine Electrical System Components (FSC 2925); Engine Cooling System Components (FSC 2935); Engine Air/Oil Cleaner/Filter/Strainers (FSC 2945).

Notes
Engines and Components classified in this FSC are intended for use as/on aircraft and/or guided missile prime movers.

Possible NAICS Codes
336412 – Aircraft Engine and Engine Parts Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
314999 – All Other Miscellaneous Textile Product Mills
332510 – Hardware Manufacturing
336411 – Aircraft Manufacturing
332991 – Ball and Roller Bearing Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
332996 – Fabricated Pipe and Pipe Fitting Manufacturing
488190 – Other Support Activities for Air Transportation

PSC 5330 Packing and Gasket Materials

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Includes
General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes
O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV), Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Notes
This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

Possible NAICS Codes
339991 – Gasket, Packing, and Sealing Device Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
339950 – Sign Manufacturing
332510 – Hardware Manufacturing
326220 – Rubber and Plastics Hoses and Belting Manufacturing

PSC 4810 Valves, Powered

Products

PSC 5340 Hardware, Commercial

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Description
Hardware

Includes
Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes
Weapons System Hardware (5342).

Notes
Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible, and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

Possible NAICS Codes
332510 – Hardware Manufacturing
339999 – All Other Miscellaneous Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
423710 – Hardware Merchant Wholesalers
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
444140 – Hardware Retailers
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing

PSC 4820 Valves, Nonpowered

Products

PSC 5365 Bushings, Rings, Shims, and Spacers

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Description
Bushings, Rings, Shims and Spacers

Includes
Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes
Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310 and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Notes
All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

Possible NAICS Codes
332510 – Hardware Manufacturing
336411 – Aircraft Manufacturing
332119 – Metal Crown, Closure, and Other Metal Stamping (except Automotive)
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
333618 – Other Engine Equipment Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332439 – Other Metal Container Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing

PSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings

Products
Federal Category 5.1: Industrial Products & Services Machinery & Components

Includes
Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes
Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Possible NAICS Codes
332996 – Fabricated Pipe and Pipe Fitting Manufacturing
332919 – Other Metal Valve and Pipe Fitting Manufacturing
326122 – Plastics Pipe and Pipe Fitting Manufacturing
333618 – Other Engine Equipment Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
333120 – Construction Machinery Manufacturing
332510 – Hardware Manufacturing
333914 – Measuring, Dispensing, and Other Pumping Equipment Manufacturing