The following Product Service Codes (PSCs) are commonly associated with NAICS 332722, Bolt, Nut, Screw, Rivet, and Washer Manufacturing

PSC 5310 Nuts and Washers

Top Result Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Includes
Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes
Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Notes
Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Possible NAICS Codes
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332510 – Hardware Manufacturing
331529 – Other Nonferrous Metal Foundries (except Die-Casting)
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332721 – Precision Turned Product Manufacturing
322299 – All Other Converted Paper Product Manufacturing
332912 – Fluid Power Valve and Hose Fitting Manufacturing

PSC 5340 Hardware, Commercial

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Description
Hardware

Includes
Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes
Weapons System Hardware (5342).

Notes
Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible, and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

Possible NAICS Codes
332510 – Hardware Manufacturing
339999 – All Other Miscellaneous Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
423710 – Hardware Merchant Wholesalers
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
444140 – Hardware Retailers
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing

PSC 5330 Packing and Gasket Materials

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Includes
General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes
O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV), Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Notes
This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

Possible NAICS Codes
339991 – Gasket, Packing, and Sealing Device Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
339950 – Sign Manufacturing
332510 – Hardware Manufacturing
326220 – Rubber and Plastics Hoses and Belting Manufacturing

PSC 2940 Engine Air and Oil Filters, Strainers, and Cleaners, Nonaircraft

Products

PSC 2320 Trucks and Truck Tractors, Wheeled

Products
Federal Category 7.5: Transportation and Logistics Services Motor Vehicles

Includes
Panel, Delivery and Pick Up Trucks, Tactical and Administrative Military Cargo Carrying Vehicles, including Wheel Mounted Amphibian Vehicles; Truck Tractor and Trailer Combinations; Armored Cars.

Excludes
Fire Trucks; Special Construction Type Earth and Rock Hauling Trucks; Motorized Air Compressors; Motorized Concrete Mixers; Construction Specialized Machinery Generally; Specially designed trucks for use in and around, airfields, hangars, and warehouses; Tracked and Halftracked Vehicles.

Notes
This class includes only complete wheel mounted trucks and truck tractors, and chassis therefore. Any end items, assemblies, parts, attachments, or accessories other than complete chassis, for use in or on such trucks or truck tractors are classified in classes other than this class. The combined chassis and body of a special purpose truck, such as a machine shop, mobile laundry, or dental laboratory, is classified in this class. The complete mobile unit, consisting of chassis, body, and additional equipment, as in an equipped truck mounted machine shop, is excluded from this class.

Possible NAICS Codes
336110 – Automobile and Light Duty Motor Vehicle Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
332618 – Other Fabricated Wire Product Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
336992 – Military Armored Vehicle, Tank, and Tank Component Manufacturing
336120 – Heavy Duty Truck Manufacturing
336211 – Motor Vehicle Body Manufacturing
333924 – Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
333120 – Construction Machinery Manufacturing
336212 – Truck Trailer Manufacturing

PSC 5342 Hardware, Weapon System

Products

PSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings

Products
Federal Category 5.1: Industrial Products & Services Machinery & Components

Includes
Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes
Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Possible NAICS Codes
332996 – Fabricated Pipe and Pipe Fitting Manufacturing
332919 – Other Metal Valve and Pipe Fitting Manufacturing
326122 – Plastics Pipe and Pipe Fitting Manufacturing
333618 – Other Engine Equipment Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
333120 – Construction Machinery Manufacturing
332510 – Hardware Manufacturing
333914 – Measuring, Dispensing, and Other Pumping Equipment Manufacturing

PSC 5365 Bushings, Rings, Shims, and Spacers

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Description
Bushings, Rings, Shims and Spacers

Includes
Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes
Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310 and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Notes
All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

Possible NAICS Codes
332510 – Hardware Manufacturing
336411 – Aircraft Manufacturing
332119 – Metal Crown, Closure, and Other Metal Stamping (except Automotive)
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
333618 – Other Engine Equipment Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332439 – Other Metal Container Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing