Includes
Flight Control Surfaces, internal and external Auxiliary Fuel Tanks; Exhaust Systems, Pylons, Trim Tabs; Aircraft.

Excludes
Fitted Covers; Helicopter Rotor Brake System and Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the Aircraft.

Notes
This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
488190 – Other Support Activities for Air Transportation

Includes
Helicopter dynamic components and specially designed parts that transmit power from the aircraft power plant to the rotary wing and rotary rudder. Also included in this class are Rotors; Blades; Rotor Blade, Trim, Tabs; Blade Sets; Yokes; Clutches and Transmissions.

Excludes
Propellers (FSC 1610); Rotor Brake Systems Components (FSC 1630); Rotor Blade Hydraulic Folding System Components (FSC 1650); Hydraulic Servo System Components (FSC 1650).

Notes
This class includes miscellaneous component parts specifically designed for, and used exclusively in, helicopter drive mechanisms and rotor blades when not specifically classified elsewhere in the FSC indexes.

Possible NAICS Codes
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing

Includes
Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp Stowed on Board; Cockpit Mounted Control Quadrants; Actuators, Electromechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories Attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports; Electric Windshield Wipers; Aircraft Onboard Inert Gas Generators; Aircraft Furniture; Aircraft Mounted Winches and Hoists; In-Flight Refueling System Components, including Fuel Components; Aircraft Curtains; Cable Tension Regulators; Sun Visors; Rear-View Mirrors; Mechanical Transmissions, Gearboxes and Constant Speed Drives Specially Designed for Aircraft.

Excludes
Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Rotor Brake System Components; Helicopter Automatic Stabilization Equipment.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
488190 – Other Support Activities for Air Transportation
336412 – Aircraft Engine and Engine Parts Manufacturing

Includes
General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes
O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV), Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Notes
This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

Possible NAICS Codes
339991 – Gasket, Packing, and Sealing Device Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
339950 – Sign Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
333120 – Construction Machinery Manufacturing
326220 – Rubber and Plastics Hoses and Belting Manufacturing

Description
Hardware

Includes
Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes
Weapons System Hardware (5342).

Notes
Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible, and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

Possible NAICS Codes
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
423710 – Hardware Merchant Wholesalers
444110 – Home Centers
339999 – All Other Miscellaneous Manufacturing
333618 – Other Engine Equipment Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333120 – Construction Machinery Manufacturing

Includes
Cabin Supercharging Equipment; Canisters; Cylinder Assemblies; Masks; Fixed Oxygen Systems; Specially Designed Aircraft Valves; Cabin Pressure Regulators; Heat Exchangers; Air Expansion Turbines; Aircraft Heaters; Ventilating System Components; Air Conditioning and Heating Duct Assemblies; Thermal De-icing Equipment; Cabin and Compartment Pressurizing Equipment; Air Diffusers; Cabin Pressure Selectors; Liquid Oxygen Converters.

Excludes
Oxygen Pressure Signals and Warning Devices; Tubing; Ground Type Heaters and Coolers; Pressurizing Equipment other than that used for Cabin and Compartment Pressurization; Fluid De-icing Equipment; Valves specifically designed for use with Aircraft Engines, Guided Missiles, and Guided Missile Engines.

Notes
This class includes components specifically designed for use in aircraft air conditioning, heating, and pressurizing equipment. Also included are specially designed components of oxygen breathing systems used in aircraft.

Possible NAICS Codes
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
333612 – Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing
339950 – Sign Manufacturing
332510 – Hardware Manufacturing
331491 – Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding
333414 – Heating Equipment (except Warm Air Furnaces) Manufacturing
332991 – Ball and Roller Bearing Manufacturing
334511 – Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Description
Bushings, Rings, Shims and Spacers

Includes
Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes
Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310 and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Notes
All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

Possible NAICS Codes
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
336411 – Aircraft Manufacturing
332119 – Metal Crown, Closure, and Other Metal Stamping (except Automotive)
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333618 – Other Engine Equipment Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332439 – Other Metal Container Manufacturing

Includes
Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes
Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Notes
Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Possible NAICS Codes
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
332510 – Hardware Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
325611 – Soap and Other Detergent Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
322299 – All Other Converted Paper Product Manufacturing
331529 – Other Nonferrous Metal Foundries (except Die-Casting)
332721 – Precision Turned Product Manufacturing

Includes
Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes
Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720; Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

Possible NAICS Codes
336411 – Aircraft Manufacturing
332996 – Fabricated Pipe and Pipe Fitting Manufacturing
331210 – Iron and Steel Pipe and Tube Manufacturing from Purchased Steel
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
331420 – Copper Rolling, Drawing, Extruding, and Alloying
326122 – Plastics Pipe and Pipe Fitting Manufacturing
333618 – Other Engine Equipment Manufacturing
332510 – Hardware Manufacturing
488190 – Other Support Activities for Air Transportation

Possible NAICS Codes
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
336411 – Aircraft Manufacturing
333618 – Other Engine Equipment Manufacturing
332721 – Precision Turned Product Manufacturing
332510 – Hardware Manufacturing
332112 – Nonferrous Forging
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332912 – Fluid Power Valve and Hose Fitting Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing

Includes
Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Possible NAICS Codes
333613 – Mechanical Power Transmission Equipment Manufacturing
336411 – Aircraft Manufacturing
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332510 – Hardware Manufacturing
336350 – Motor Vehicle Transmission and Power Train Parts Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
333612 – Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

Includes
Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.

Excludes
Shafts (FSC 3040); Lock Keys (FSC 5340).

Notes
Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation, e.g., shaft and hub, c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.

Possible NAICS Codes
332510 – Hardware Manufacturing
332618 – Other Fabricated Wire Product Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
336411 – Aircraft Manufacturing
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
444140 – Hardware Retailers
332111 – Iron and Steel Forging
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing

Description
Aircraft Hydraulic, Vacuum and De-icing System Components

Includes
Hydraulic and Pneumatic Accumulators, Pumps, Motors, Actuating Cylinders, and Filters; De-icing Boots; Fluid Type De-icing Pumps, Valves and Filters; Vacuum System Oil Separators; Pneumatic Pressurization Equipment other than that for pressurizing cabins and compartments.

Excludes
Jet Engine Hydraulic Components (FSC 2840); Valves specifically designed for air conditioning, heating. ventilating, cabin pressurizing, and thermal de-icing (FSC 1660); Valves specifically designed for use with Aircraft Engines (FSC 2840); Guided Missiles and Guided Missile Engines (FSC 1338); Landing Gear (FSC 1620), Wheel and Brake System Components (FSC 1630); Oxygen Breathing System Components (FSC 1660); In-flight Refueling System Hydraulic components (FSC 1680); Specifically designed hydraulic power steering system components (FSC 1620).

Notes
This class includes only those components specifically designed for aircraft use.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
333618 – Other Engine Equipment Manufacturing
332991 – Ball and Roller Bearing Manufacturing
334511 – Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Includes
Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes
Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Notes
Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fitting/facilities or include pre-lubrication.

Possible NAICS Codes
332991 – Ball and Roller Bearing Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333618 – Other Engine Equipment Manufacturing
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
332111 – Iron and Steel Forging
336390 – Other Motor Vehicle Parts Manufacturing
213113 – Support Activities for Coal Mining
332721 – Precision Turned Product Manufacturing

Includes
Shock Struts and Components; Installation Elements, such as Torsion Bars, Vibration Links, Drag Struts; Landing Gear Trunions, Axles and Shimmy Dampeners; Specially designed hydraulic power steering system components.

Excludes
Mounting Braces and Mounting Plates permanently installed on aircraft (FSC 1680); Landing Wheels, Skis, and Floats (FSC 1630); Wheel Brakes and Wheel Brake Cylinders (FSC 1630).

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
332510 – Hardware Manufacturing