Includes
Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes
Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Notes
Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Possible NAICS Codes
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
332510 – Hardware Manufacturing
325611 – Soap and Other Detergent Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
332721 – Precision Turned Product Manufacturing
322299 – All Other Converted Paper Product Manufacturing
331529 – Other Nonferrous Metal Foundries (except Die-Casting)

Includes
Propulsion Shafts; Ship Propellers; Marine Transmissions, Reverse and Reduction Gear Type.

Excludes
Engines (FSC 2810, 2815); Turbines (FSC 2825, 2835, 2840).

Possible NAICS Codes
336415 – Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing
333618 – Other Engine Equipment Manufacturing
336612 – Boat Building
336611 – Ship Building and Repairing
336214 – Travel Trailer and Camper Manufacturing
333613 – Mechanical Power Transmission Equipment Manufacturing
331529 – Other Nonferrous Metal Foundries (except Die-Casting)
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
339991 – Gasket, Packing, and Sealing Device Manufacturing

Includes
Compressor and Turbine Rotors; Blades; Combustion Chamber; Accessory Gear Box; Afterburner; Exhaust Cone; Reservoirs, Hydraulic; Tank, Oil.

Excludes
Oil, Air, Anti-icing, and Hydraulic Regulators, Valves, and Pumps specially designed for Gas Turbines and Jet Engines (FSC 2995); Control Assemblies, Push-Pull (FSC 2995); Engine Mounted Control Assemblies (FSC 2995); Fuel System Components (FSC 2915); Engine Electrical System Components (FSC 2925); Engine Cooling System Components (FSC 2935); Engine Air/Oil Cleaner/Filter/Strainers (FSC 2945).

Notes
Engines and Components classified in this FSC are intended for use as/on aircraft and/or guided missile prime movers.

Possible NAICS Codes
336412 – Aircraft Engine and Engine Parts Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
314999 – All Other Miscellaneous Textile Product Mills
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
488190 – Other Support Activities for Air Transportation
333611 – Turbine and Turbine Generator Set Units Manufacturing
332996 – Fabricated Pipe and Pipe Fitting Manufacturing

Includes
Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Possible NAICS Codes
333613 – Mechanical Power Transmission Equipment Manufacturing
336411 – Aircraft Manufacturing
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332510 – Hardware Manufacturing
336350 – Motor Vehicle Transmission and Power Train Parts Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
336412 – Aircraft Engine and Engine Parts Manufacturing
333612 – Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

Includes
Grave Markers; Burial Vaults; Burial Urns; Caskets; Burial Boxes; Morticians' Supplies; Monuments; Casket Shipping Cases.

Excludes
Hearses; Mortuary Refrigerators.

Possible NAICS Codes
327991 – Cut Stone and Stone Product Manufacturing
333618 – Other Engine Equipment Manufacturing
326121 – Unlaminated Plastics Profile Shape Manufacturing
327390 – Other Concrete Product Manufacturing
339999 – All Other Miscellaneous Manufacturing
561990 – All Other Support Services
812210 – Funeral Homes and Funeral Services
339995 – Burial Casket Manufacturing
326111 – Plastics Bag and Pouch Manufacturing
331529 – Other Nonferrous Metal Foundries (except Die-Casting)

Includes
Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes
Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720; Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

Possible NAICS Codes
336411 – Aircraft Manufacturing
332996 – Fabricated Pipe and Pipe Fitting Manufacturing
331210 – Iron and Steel Pipe and Tube Manufacturing from Purchased Steel
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
326122 – Plastics Pipe and Pipe Fitting Manufacturing
331420 – Copper Rolling, Drawing, Extruding, and Alloying
333618 – Other Engine Equipment Manufacturing
332510 – Hardware Manufacturing
488190 – Other Support Activities for Air Transportation

Includes
General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes
O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV), Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Notes
This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

Possible NAICS Codes
339991 – Gasket, Packing, and Sealing Device Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
339950 – Sign Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
333120 – Construction Machinery Manufacturing
326220 – Rubber and Plastics Hoses and Belting Manufacturing

Includes
Turret Brakes; Clutch Brakes, Tank Turret.

Possible NAICS Codes
336390 – Other Motor Vehicle Parts Manufacturing
336330 – Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing
336340 – Motor Vehicle Brake System Manufacturing
333618 – Other Engine Equipment Manufacturing
332510 – Hardware Manufacturing
336350 – Motor Vehicle Transmission and Power Train Parts Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
336211 – Motor Vehicle Body Manufacturing
333120 – Construction Machinery Manufacturing
336992 – Military Armored Vehicle, Tank, and Tank Component Manufacturing

Description
Hardware

Includes
Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes
Weapons System Hardware (5342).

Notes
Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible, and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

Possible NAICS Codes
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
444110 – Home Centers
423710 – Hardware Merchant Wholesalers
333618 – Other Engine Equipment Manufacturing
339999 – All Other Miscellaneous Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
333120 – Construction Machinery Manufacturing

Includes
Anti-intrusion Alarm Systems; Foghorns; Gongs; Chimes; Bells; Burglar Alarm Systems; Fire Alarms; Police Alarm Systems; Sounding Devices; Manual Gas Alarms; Landing Wands.

Excludes
Loran; Radar; Sonar; Engine Oil and Fuel Warning Devices; Aircraft Oxygen Warning Devices.

Possible NAICS Codes
561621 – Security Systems Services (except Locksmiths)
334290 – Other Communications Equipment Manufacturing
335311 – Power, Distribution, and Specialty Transformer Manufacturing
334512 – Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use
334519 – Other Measuring and Controlling Device Manufacturing
333120 – Construction Machinery Manufacturing
333618 – Other Engine Equipment Manufacturing
334220 – Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
335999 – All Other Miscellaneous Electrical Equipment and Component Manufacturing
541330 – Engineering Services

Possible NAICS Codes
331529 – Other Nonferrous Metal Foundries (except Die-Casting)
331110 – Iron and Steel Mills and Ferroalloy Manufacturing
562920 – Materials Recovery Facilities
541990 – All Other Professional, Scientific, and Technical Services

Includes
Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes
Commercial Hardware (FSC 5340).

Notes
Hardware designed for weapon systems unique applications will be classified in this FSC.

Possible NAICS Codes
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
332510 – Hardware Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333310 – Commercial and Service Industry Machinery Manufacturing
336411 – Aircraft Manufacturing
333618 – Other Engine Equipment Manufacturing

Includes
Sails; Chain Ladders; Rope Ladders; Marine Furniture.

Possible NAICS Codes
336611 – Ship Building and Repairing
441222 – Boat Dealers
114119 – Other Marine Fishing
332322 – Sheet Metal Work Manufacturing
333618 – Other Engine Equipment Manufacturing
332321 – Metal Window and Door Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
334511 – Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
332510 – Hardware Manufacturing
336612 – Boat Building

Includes
Bullion; Ingot.

Notes
Only bulk material will be identified in this class. Primary Forms are raw unfinished ingots, pigs, that require refinement to be usable and are made of precious metals.

Possible NAICS Codes
331410 – Nonferrous Metal (except Aluminum) Smelting and Refining
331491 – Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
423940 – Jewelry, Watch, Precious Stone, and Precious Metal Merchant Wholesalers

Includes
Flight Control Surfaces, internal and external Auxiliary Fuel Tanks; Exhaust Systems, Pylons, Trim Tabs; Aircraft.

Excludes
Fitted Covers; Helicopter Rotor Brake System and Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the Aircraft.

Notes
This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
488190 – Other Support Activities for Air Transportation
336412 – Aircraft Engine and Engine Parts Manufacturing