Possible NAICS Codes
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
336411 – Aircraft Manufacturing
333618 – Other Engine Equipment Manufacturing
332721 – Precision Turned Product Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332510 – Hardware Manufacturing
332112 – Nonferrous Forging
332912 – Fluid Power Valve and Hose Fitting Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing

Includes
Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes
Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Notes
Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Possible NAICS Codes
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
332510 – Hardware Manufacturing
322299 – All Other Converted Paper Product Manufacturing
331529 – Other Nonferrous Metal Foundries (except Die-Casting)
332721 – Precision Turned Product Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
332912 – Fluid Power Valve and Hose Fitting Manufacturing

Includes
Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control and navigational systems.

Excludes
Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters, ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332710 – Machine Shops
334419 – Other Electronic Component Manufacturing
332721 – Precision Turned Product Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
334515 – Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
334514 – Totalizing Fluid Meter and Counting Device Manufacturing
488190 – Other Support Activities for Air Transportation
336411 – Aircraft Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing

Possible NAICS Codes
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
322299 – All Other Converted Paper Product Manufacturing
332510 – Hardware Manufacturing
332112 – Nonferrous Forging
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333618 – Other Engine Equipment Manufacturing
423710 – Hardware Merchant Wholesalers
336412 – Aircraft Engine and Engine Parts Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
336411 – Aircraft Manufacturing

Description
Hardware

Includes
Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes
Weapons System Hardware (5342).

Notes
Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible, and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

Possible NAICS Codes
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
339999 – All Other Miscellaneous Manufacturing
423710 – Hardware Merchant Wholesalers
333618 – Other Engine Equipment Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
444140 – Hardware Retailers
333120 – Construction Machinery Manufacturing

Includes
Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes
Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Notes
Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fitting/facilities or include pre-lubrication.

Possible NAICS Codes
332991 – Ball and Roller Bearing Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333618 – Other Engine Equipment Manufacturing
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
336390 – Other Motor Vehicle Parts Manufacturing
332111 – Iron and Steel Forging
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
333613 – Mechanical Power Transmission Equipment Manufacturing

Excludes
Packing and Gasket Material (FSC 5330).

Possible NAICS Codes
339991 – Gasket, Packing, and Sealing Device Manufacturing
333618 – Other Engine Equipment Manufacturing
336310 – Motor Vehicle Gasoline Engine and Engine Parts Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
332618 – Other Fabricated Wire Product Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
326220 – Rubber and Plastics Hoses and Belting Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
333120 – Construction Machinery Manufacturing

Includes
Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes
Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Possible NAICS Codes
332996 – Fabricated Pipe and Pipe Fitting Manufacturing
332919 – Other Metal Valve and Pipe Fitting Manufacturing
326122 – Plastics Pipe and Pipe Fitting Manufacturing
333618 – Other Engine Equipment Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333310 – Commercial and Service Industry Machinery Manufacturing

Includes
General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes
O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV), Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Notes
This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

Possible NAICS Codes
339991 – Gasket, Packing, and Sealing Device Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
339950 – Sign Manufacturing
332510 – Hardware Manufacturing
424490 – Other Grocery and Related Products Merchant Wholesalers

Includes
Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.

Excludes
Shafts (FSC 3040); Lock Keys (FSC 5340).

Notes
Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation, e.g., shaft and hub, c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.

Possible NAICS Codes
332510 – Hardware Manufacturing
332618 – Other Fabricated Wire Product Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333618 – Other Engine Equipment Manufacturing
444140 – Hardware Retailers
332111 – Iron and Steel Forging
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing

Includes
Eyelets; Grommets; Aircraft Cowling Fasteners; Textile Fasteners; Retaining Rings; Threaded Inserts.

Possible NAICS Codes
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332119 – Metal Crown, Closure, and Other Metal Stamping (except Automotive)
336411 – Aircraft Manufacturing
332613 – Spring Manufacturing
339993 – Fastener, Button, Needle, and Pin Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing

Description
Bushings, Rings, Shims and Spacers

Includes
Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes
Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310 and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Notes
All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

Possible NAICS Codes
332510 – Hardware Manufacturing
336411 – Aircraft Manufacturing
332119 – Metal Crown, Closure, and Other Metal Stamping (except Automotive)
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
332439 – Other Metal Container Manufacturing

Includes
Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes
Commercial Hardware (FSC 5340).

Notes
Hardware designed for weapon systems unique applications will be classified in this FSC.

Possible NAICS Codes
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
332510 – Hardware Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333310 – Commercial and Service Industry Machinery Manufacturing
336411 – Aircraft Manufacturing
333618 – Other Engine Equipment Manufacturing
332710 – Machine Shops
333120 – Construction Machinery Manufacturing
336412 – Aircraft Engine and Engine Parts Manufacturing

Possible NAICS Codes
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
332912 – Fluid Power Valve and Hose Fitting Manufacturing
488190 – Other Support Activities for Air Transportation
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing

Includes
Bar Size Shapes (under 3 inches); Metal Piles and Piling; Angles; Channels; Tees; Zees.

Excludes
Plate, Sheet and Strip Materials (FSC 9515).

Notes
This class contains bulk material only. Specially designed items should be placed in a more appropriate class. This class includes items usually used in building, bridge and similar construction, such as, I beams, angles, and the like.

Possible NAICS Codes
332111 – Iron and Steel Forging
332312 – Fabricated Structural Metal Manufacturing
331221 – Rolled Steel Shape Manufacturing
332710 – Machine Shops
331110 – Iron and Steel Mills and Ferroalloy Manufacturing
332721 – Precision Turned Product Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
337215 – Showcase, Partition, Shelving, and Locker Manufacturing
488190 – Other Support Activities for Air Transportation