The following Product Service Codes (PSCs) are commonly associated with NAICS 336413, Other Aircraft Parts and Auxiliary Equipment Manufacturing

PSC 1560 Airframe Structural Components

Top Result Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Flight Control Surfaces, internal and external Auxiliary Fuel Tanks; Exhaust Systems, Pylons, Trim Tabs; Aircraft.

Excludes
Fitted Covers; Helicopter Rotor Brake System and Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the Aircraft.

Notes
This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
488190 – Other Support Activities for Air Transportation

PSC 1680 Miscellaneous Aircraft Accessories and Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp Stowed on Board; Cockpit Mounted Control Quadrants; Actuators, Electromechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories Attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports; Electric Windshield Wipers; Aircraft Onboard Inert Gas Generators; Aircraft Furniture; Aircraft Mounted Winches and Hoists; In-Flight Refueling System Components, including Fuel Components; Aircraft Curtains; Cable Tension Regulators; Sun Visors; Rear-View Mirrors; Mechanical Transmissions, Gearboxes and Constant Speed Drives Specially Designed for Aircraft.

Excludes
Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Rotor Brake System Components; Helicopter Automatic Stabilization Equipment.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
488190 – Other Support Activities for Air Transportation
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
314910 – Textile Bag and Canvas Mills
334511 – Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

PSC 1650 Aircraft Hydraulic, Vacuum, and De-Icing System Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Description
Aircraft Hydraulic, Vacuum and De-icing System Components

Includes
Hydraulic and Pneumatic Accumulators, Pumps, Motors, Actuating Cylinders, and Filters; De-icing Boots; Fluid Type De-icing Pumps, Valves and Filters; Vacuum System Oil Separators; Pneumatic Pressurization Equipment other than that for pressurizing cabins and compartments.

Excludes
Jet Engine Hydraulic Components (FSC 2840); Valves specifically designed for air conditioning, heating. ventilating, cabin pressurizing, and thermal de-icing (FSC 1660); Valves specifically designed for use with Aircraft Engines (FSC 2840); Guided Missiles and Guided Missile Engines (FSC 1338); Landing Gear (FSC 1620), Wheel and Brake System Components (FSC 1630); Oxygen Breathing System Components (FSC 1660); In-flight Refueling System Hydraulic components (FSC 1680); Specifically designed hydraulic power steering system components (FSC 1620).

Notes
This class includes only those components specifically designed for aircraft use.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
332991 – Ball and Roller Bearing Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
488190 – Other Support Activities for Air Transportation

PSC 1730 Aircraft Ground Servicing Equipment

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Energizers; Engine Preheaters; Mooring Assemblies; Wheel Chocks; Beaching Equipment; Aileron, Elevator, and Rudder Locks; Passenger Loading Ramps; Maintenance Platforms; Aircraft Maintenance and Boarding Ladders; Aircraft Maintenance Slings and Hoists; Aircraft Fin Tilting Jacks; Airfield Specialized Lift Trucks and Trailers; Fitted Covers for Airframe Components; Aircraft Engine Covers.

Excludes
Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies (FSC 1740); Maintenance Stands designed for support of aircraft assemblies during repair or overhaul (FSC 4920); Test Stands (FSC 4920); General Purpose Jacks (FSC 5120); Slings (FSC 3940), and Hoists (FSC 3950); Trailers (FSC 2330), Liquid Oxygen, Aircraft Servicing (FSC 1660).

Notes
This class excludes "vehicular components" such as those listed under FSCs 2520, 2530, 2540, 2590.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333519 – Rolling Mill and Other Metalworking Machinery Manufacturing
336411 – Aircraft Manufacturing
333924 – Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
488190 – Other Support Activities for Air Transportation
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing

PSC 6830 Gases: Compressed and Liquefied

Products
Federal Category 5.6: Industrial Products & Services Basic Materials

PSC 1620 Aircraft Landing Gear Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Shock Struts and Components; Installation Elements, such as Torsion Bars, Vibration Links, Drag Struts; Landing Gear Trunions, Axles and Shimmy Dampeners; Specially designed hydraulic power steering system components.

Excludes
Mounting Braces and Mounting Plates permanently installed on aircraft (FSC 1680); Landing Wheels, Skis, and Floats (FSC 1630); Wheel Brakes and Wheel Brake Cylinders (FSC 1630).

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
332510 – Hardware Manufacturing

PSC 4920 Aircraft Maintenance and Repair Shop Specialized Equipment

Products
Federal Category 5.1: Industrial Products & Services Machinery & Components

Includes
Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control and navigational systems.

Excludes
Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters, ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332710 – Machine Shops
334419 – Other Electronic Component Manufacturing
332721 – Precision Turned Product Manufacturing
334515 – Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
488190 – Other Support Activities for Air Transportation
334514 – Totalizing Fluid Meter and Counting Device Manufacturing
334511 – Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
336411 – Aircraft Manufacturing
334519 – Other Measuring and Controlling Device Manufacturing

PSC 1630 Aircraft Wheel and Brake Systems

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Skis; Floats; Tracks; Landing Wheel Skid Detectors; Valves specifically designed for use with hydraulic or pneumatic wheel and brake systems; Helicopter Rotor Brake System Components.

Excludes
Landing Gear Axles (FSC 1620).

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
334519 – Other Measuring and Controlling Device Manufacturing
326211 – Tire Manufacturing (except Retreading)
332510 – Hardware Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing

PSC 1660 Aircraft Air Conditioning, Heating, and Pressurizing Equipment

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Cabin Supercharging Equipment; Canisters; Cylinder Assemblies; Masks; Fixed Oxygen Systems; Specially Designed Aircraft Valves; Cabin Pressure Regulators; Heat Exchangers; Air Expansion Turbines; Aircraft Heaters; Ventilating System Components; Air Conditioning and Heating Duct Assemblies; Thermal De-icing Equipment; Cabin and Compartment Pressurizing Equipment; Air Diffusers; Cabin Pressure Selectors; Liquid Oxygen Converters.

Excludes
Oxygen Pressure Signals and Warning Devices; Tubing; Ground Type Heaters and Coolers; Pressurizing Equipment other than that used for Cabin and Compartment Pressurization; Fluid De-icing Equipment; Valves specifically designed for use with Aircraft Engines, Guided Missiles, and Guided Missile Engines.

Notes
This class includes components specifically designed for use in aircraft air conditioning, heating, and pressurizing equipment. Also included are specially designed components of oxygen breathing systems used in aircraft.

Possible NAICS Codes
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332510 – Hardware Manufacturing
333612 – Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332991 – Ball and Roller Bearing Manufacturing

PSC 5340 Hardware, Commercial

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Description
Hardware

Includes
Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes
Weapons System Hardware (5342).

Notes
Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible, and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

Possible NAICS Codes
332510 – Hardware Manufacturing
339999 – All Other Miscellaneous Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
423710 – Hardware Merchant Wholesalers
444140 – Hardware Retailers
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing

PSC 5330 Packing and Gasket Materials

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Includes
General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes
O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV), Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Notes
This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

Possible NAICS Codes
339991 – Gasket, Packing, and Sealing Device Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
339950 – Sign Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
332510 – Hardware Manufacturing
424490 – Other Grocery and Related Products Merchant Wholesalers

PSC 1670 Parachutes; Aerial Pick Up, Delivery, Recovery Systems; and Cargo Tie Down Equipment

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Description
Parachutes; Aerial Pick Up, Delivery, Recovery Systems; Cargo Tie Down Equipment

Excludes
Fitting Assemblies built into the aircraft structure.

Notes
Includes specifically designed items, sets, and systems for air-to-air, air-to-surface, and surface-to-air delivery, pick up and recovery operations, unless parts, attachments, assemblies, for use in or on such systems (i.e. space vehicle aerial recovery systems) are specifically indexed to other classes of the FSC (i.e., transmitting radio buoys and direction finding subsystem components).

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
314999 – All Other Miscellaneous Textile Product Mills
325920 – Explosives Manufacturing
336411 – Aircraft Manufacturing
334511 – Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

PSC 1615 Helicopter Rotor Blades, Drive Mechanisms and Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Helicopter dynamic components and specially designed parts that transmit power from the aircraft power plant to the rotary wing and rotary rudder. Also included in this class are Rotors; Blades; Rotor Blade, Trim, Tabs; Blade Sets; Yokes; Clutches and Transmissions.

Excludes
Propellers (FSC 1610); Rotor Brake Systems Components (FSC 1630); Rotor Blade Hydraulic Folding System Components (FSC 1650); Hydraulic Servo System Components (FSC 1650).

Notes
This class includes miscellaneous component parts specifically designed for, and used exclusively in, helicopter drive mechanisms and rotor blades when not specifically classified elsewhere in the FSC indexes.

Possible NAICS Codes
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing

PSC 1610 Aircraft Propellers and Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

PSC 2840 Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Compressor and Turbine Rotors; Blades; Combustion Chamber; Accessory Gear Box; Afterburner; Exhaust Cone; Reservoirs, Hydraulic; Tank, Oil.

Excludes
Oil, Air, Anti-icing, and Hydraulic Regulators, Valves, and Pumps specially designed for Gas Turbines and Jet Engines (FSC 2995); Control Assemblies, Push-Pull (FSC 2995); Engine Mounted Control Assemblies (FSC 2995); Fuel System Components (FSC 2915); Engine Electrical System Components (FSC 2925); Engine Cooling System Components (FSC 2935); Engine Air/Oil Cleaner/Filter/Strainers (FSC 2945).

Notes
Engines and Components classified in this FSC are intended for use as/on aircraft and/or guided missile prime movers.

Possible NAICS Codes
336412 – Aircraft Engine and Engine Parts Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332510 – Hardware Manufacturing
314999 – All Other Miscellaneous Textile Product Mills
336411 – Aircraft Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
332991 – Ball and Roller Bearing Manufacturing
332996 – Fabricated Pipe and Pipe Fitting Manufacturing