The following Product Service Codes (PSCs) are commonly associated with NAICS 339950, Sign Manufacturing

PSC 9905 Signs, Advertising Displays, and Identification Plates

Top Result Products

PSC 7830 Recreational and Gymnastic Equipment

Products

PSC 5330 Packing and Gasket Materials

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Includes
General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes
O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV), Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Notes
This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

Possible NAICS Codes
339991 – Gasket, Packing, and Sealing Device Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
339950 – Sign Manufacturing
332510 – Hardware Manufacturing
326220 – Rubber and Plastics Hoses and Belting Manufacturing

PSC 2925 Engine Electrical System Components, Aircraft Prime Moving

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Magnetos; Igniters (Spark Plugs); Ignition Coils; Ignition Distributors; Engine Voltage Regulators; Ignition Harness Assemblies; Starting Motors for Engines; Engine Accessory Generators.

Excludes
Aircraft Lighting Fixtures (FSC 6220); and Auxiliary Aircraft Generators (FSC 6115).

Notes
Items designed for specific use on aircraft and guided missile prime movers are to be placed in this FSC.

Possible NAICS Codes
336412 – Aircraft Engine and Engine Parts Manufacturing
339950 – Sign Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336320 – Motor Vehicle Electrical and Electronic Equipment Manufacturing
334419 – Other Electronic Component Manufacturing
336411 – Aircraft Manufacturing
488190 – Other Support Activities for Air Transportation
333611 – Turbine and Turbine Generator Set Units Manufacturing

PSC 5365 Bushings, Rings, Shims, and Spacers

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Description
Bushings, Rings, Shims and Spacers

Includes
Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes
Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310 and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Notes
All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

Possible NAICS Codes
332510 – Hardware Manufacturing
336411 – Aircraft Manufacturing
332119 – Metal Crown, Closure, and Other Metal Stamping (except Automotive)
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
333618 – Other Engine Equipment Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332439 – Other Metal Container Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing

PSC 1660 Aircraft Air Conditioning, Heating, and Pressurizing Equipment

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Cabin Supercharging Equipment; Canisters; Cylinder Assemblies; Masks; Fixed Oxygen Systems; Specially Designed Aircraft Valves; Cabin Pressure Regulators; Heat Exchangers; Air Expansion Turbines; Aircraft Heaters; Ventilating System Components; Air Conditioning and Heating Duct Assemblies; Thermal De-icing Equipment; Cabin and Compartment Pressurizing Equipment; Air Diffusers; Cabin Pressure Selectors; Liquid Oxygen Converters.

Excludes
Oxygen Pressure Signals and Warning Devices; Tubing; Ground Type Heaters and Coolers; Pressurizing Equipment other than that used for Cabin and Compartment Pressurization; Fluid De-icing Equipment; Valves specifically designed for use with Aircraft Engines, Guided Missiles, and Guided Missile Engines.

Notes
This class includes components specifically designed for use in aircraft air conditioning, heating, and pressurizing equipment. Also included are specially designed components of oxygen breathing systems used in aircraft.

Possible NAICS Codes
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333612 – Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing
332510 – Hardware Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332991 – Ball and Roller Bearing Manufacturing
339950 – Sign Manufacturing
331491 – Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

PSC 2920 Engine Electrical System Components, Nonaircraft

Products

PSC 5310 Nuts and Washers

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Includes
Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes
Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Notes
Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Possible NAICS Codes
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332510 – Hardware Manufacturing
331529 – Other Nonferrous Metal Foundries (except Die-Casting)
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
332721 – Precision Turned Product Manufacturing
322299 – All Other Converted Paper Product Manufacturing
332912 – Fluid Power Valve and Hose Fitting Manufacturing

PSC 5340 Hardware, Commercial

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Description
Hardware

Includes
Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes
Weapons System Hardware (5342).

Notes
Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible, and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

Possible NAICS Codes
332510 – Hardware Manufacturing
339999 – All Other Miscellaneous Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
423710 – Hardware Merchant Wholesalers
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
444140 – Hardware Retailers
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing

PSC 1650 Aircraft Hydraulic, Vacuum, and De-Icing System Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Description
Aircraft Hydraulic, Vacuum and De-icing System Components

Includes
Hydraulic and Pneumatic Accumulators, Pumps, Motors, Actuating Cylinders, and Filters; De-icing Boots; Fluid Type De-icing Pumps, Valves and Filters; Vacuum System Oil Separators; Pneumatic Pressurization Equipment other than that for pressurizing cabins and compartments.

Excludes
Jet Engine Hydraulic Components (FSC 2840); Valves specifically designed for air conditioning, heating. ventilating, cabin pressurizing, and thermal de-icing (FSC 1660); Valves specifically designed for use with Aircraft Engines (FSC 2840); Guided Missiles and Guided Missile Engines (FSC 1338); Landing Gear (FSC 1620), Wheel and Brake System Components (FSC 1630); Oxygen Breathing System Components (FSC 1660); In-flight Refueling System Hydraulic components (FSC 1680); Specifically designed hydraulic power steering system components (FSC 1620).

Notes
This class includes only those components specifically designed for aircraft use.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
332991 – Ball and Roller Bearing Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
334511 – Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
333618 – Other Engine Equipment Manufacturing
333613 – Mechanical Power Transmission Equipment Manufacturing

PSC 2835 Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Description
Gas Turbines and Jet Engines, Non-Aircraft; and Components

Includes
Airflow Deflectors; Turbine Cases; Turbine Housings; Compressor and Turbine Rotors; Compressor and Turbine Rotor Blades; Combustion Chamber; Accessory Gear Box; Turbine Disks and Hubs; Turbine Vanes.

Excludes
Engine Fuel System Components (FSC 2910); Engine electrical System Components (FSC 2920); Engine Cooling System Components (FSC 2930); Engine Air/Oil Cleaners/Filters/Strainers (FSC 2940); Engine Accessories (Air Duct Heaters, Engine Mounted Control Assemblies) (FSC 2990).

Notes
Engines and Components classified in this FSC are primarily for use on non-aircraft equipment but can also be used on aircraft ground support equipment.

Possible NAICS Codes
333611 – Turbine and Turbine Generator Set Units Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
334519 – Other Measuring and Controlling Device Manufacturing
332510 – Hardware Manufacturing
333613 – Mechanical Power Transmission Equipment Manufacturing
336411 – Aircraft Manufacturing
332991 – Ball and Roller Bearing Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
339950 – Sign Manufacturing
336412 – Aircraft Engine and Engine Parts Manufacturing