The following Product Service Codes (PSCs) are commonly associated with NAICS 488190, Other Support Activities for Air Transportation

PSC J015 Maint/Repair/Rebuild of Equipment—Aircraft and Airframe Structural Components

Top Result Services
Federal Category 18.1: Equipment Related Services Maintenance, Repair and Overhaul

PSC 1560 Airframe Structural Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Flight Control Surfaces, internal and external Auxiliary Fuel Tanks; Exhaust Systems, Pylons, Trim Tabs; Aircraft.

Excludes
Fitted Covers; Helicopter Rotor Brake System and Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the Aircraft.

Notes
This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
488190 – Other Support Activities for Air Transportation

PSC 1680 Miscellaneous Aircraft Accessories and Components

Products
Federal Category 14.2: Sustainment S&E Engines, Components & Spt Eq

Includes
Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp Stowed on Board; Cockpit Mounted Control Quadrants; Actuators, Electromechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories Attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports; Electric Windshield Wipers; Aircraft Onboard Inert Gas Generators; Aircraft Furniture; Aircraft Mounted Winches and Hoists; In-Flight Refueling System Components, including Fuel Components; Aircraft Curtains; Cable Tension Regulators; Sun Visors; Rear-View Mirrors; Mechanical Transmissions, Gearboxes and Constant Speed Drives Specially Designed for Aircraft.

Excludes
Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Rotor Brake System Components; Helicopter Automatic Stabilization Equipment.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
488190 – Other Support Activities for Air Transportation
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
314910 – Textile Bag and Canvas Mills
334511 – Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

PSC 4710 Pipe, Tube and Rigid Tubing

Products
Federal Category 5.1: Industrial Products & Services Machinery & Components

Includes
Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes
Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720; Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

Possible NAICS Codes
331210 – Iron and Steel Pipe and Tube Manufacturing from Purchased Steel
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332996 – Fabricated Pipe and Pipe Fitting Manufacturing
331420 – Copper Rolling, Drawing, Extruding, and Alloying
326122 – Plastics Pipe and Pipe Fitting Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
488190 – Other Support Activities for Air Transportation
333618 – Other Engine Equipment Manufacturing
336412 – Aircraft Engine and Engine Parts Manufacturing

PSC 9510 Bars and Rods

Products
Federal Category 5.6: Industrial Products & Services Basic Materials

Includes
Metal Bars and Rods

Excludes
Muck Bar (FSC 9640); Rods for Wire (FSC 9640); Sheet Bar (FSC 9640); Threaded Rods (FSC 5306); Grooved Rod (FSC 5340).

Notes
This class contains bulk material only. Specially designed items should be placed in a more appropriate class. a. Bars are elongated pieces of metal of simple uniform cross-sections usually rectangular, circular, or hexagonal produced by forging or hotrolling, also known as barstock. b. Rods are thin round metal bar, differentiated by dimensional parameters, listed in the item name definition.

Possible NAICS Codes
488190 – Other Support Activities for Air Transportation
332111 – Iron and Steel Forging
331110 – Iron and Steel Mills and Ferroalloy Manufacturing
331221 – Rolled Steel Shape Manufacturing
331315 – Aluminum Sheet, Plate, and Foil Manufacturing
331491 – Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding
423510 – Metal Service Centers and Other Metal Merchant Wholesalers
332312 – Fabricated Structural Metal Manufacturing
331210 – Iron and Steel Pipe and Tube Manufacturing from Purchased Steel
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing

PSC 8135 Packaging and Packing Bulk Materials

Products
Federal Category 7.1: Transportation and Logistics Services Package Delivery & Packaging

PSC 5340 Hardware, Commercial

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Description
Hardware

Includes
Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes
Weapons System Hardware (5342).

Notes
Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible, and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

Possible NAICS Codes
332510 – Hardware Manufacturing
339999 – All Other Miscellaneous Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
423710 – Hardware Merchant Wholesalers
444140 – Hardware Retailers
333618 – Other Engine Equipment Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
336411 – Aircraft Manufacturing
332999 – All Other Miscellaneous Fabricated Metal Product Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing

PSC 7510 Office Supplies

Products
Federal Category 6.1: Office Management Office Management Products

Includes
Crayons; Erasers; File Holders; Writing Ink; Printing Ink; Paper Fasteners; Pencils; Penholders and Pen Points; Rulers, Office Type; Art Supplies; Tape, Pressure Sensitive Adhesive

Excludes
Office Devices; Fountain Pens; Artists' Brushes; Paper Stationery; Record Forms; Mechanical Pencils.

Possible NAICS Codes
339940 – Office Supplies (except Paper) Manufacturing
459410 – Office Supplies and Stationery Retailers
322230 – Stationery Product Manufacturing
322120 – Paper Mills
325992 – Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing
424120 – Stationery and Office Supplies Merchant Wholesalers
424130 – Industrial and Personal Service Paper Merchant Wholesalers
332510 – Hardware Manufacturing

PSC 5310 Nuts and Washers

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Includes
Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes
Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Notes
Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

Possible NAICS Codes
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
332510 – Hardware Manufacturing
331529 – Other Nonferrous Metal Foundries (except Die-Casting)
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
488190 – Other Support Activities for Air Transportation
332112 – Nonferrous Forging
332721 – Precision Turned Product Manufacturing

PSC 5330 Packing and Gasket Materials

Products
Federal Category 5.3: Industrial Products & Services Hardware & Tools

Includes
General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes
O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV), Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Notes
This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

Possible NAICS Codes
339991 – Gasket, Packing, and Sealing Device Manufacturing
332722 – Bolt, Nut, Screw, Rivet, and Washer Manufacturing
333618 – Other Engine Equipment Manufacturing
336411 – Aircraft Manufacturing
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
333998 – All Other Miscellaneous General Purpose Machinery Manufacturing
339950 – Sign Manufacturing
332994 – Small Arms, Ordnance, and Ordnance Accessories Manufacturing
332510 – Hardware Manufacturing
424490 – Other Grocery and Related Products Merchant Wholesalers

PSC 4920 Aircraft Maintenance and Repair Shop Specialized Equipment

Products
Federal Category 5.1: Industrial Products & Services Machinery & Components

Includes
Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control and navigational systems.

Excludes
Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters, ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

Possible NAICS Codes
336413 – Other Aircraft Parts and Auxiliary Equipment Manufacturing
332710 – Machine Shops
334419 – Other Electronic Component Manufacturing
332721 – Precision Turned Product Manufacturing
334515 – Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
488190 – Other Support Activities for Air Transportation
334514 – Totalizing Fluid Meter and Counting Device Manufacturing
334511 – Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
336411 – Aircraft Manufacturing
334519 – Other Measuring and Controlling Device Manufacturing